DSpace Repository

Facile Synthesis of Fe3O4/TiO2 Composite with Enhanced Magnetic and Photocatalytic Properties for Water Purification

Show simple item record

dc.contributor.author Wathsala, K.L.
dc.contributor.author Kulathunga, M.U.S.
dc.contributor.author Jayaweera, P.M.
dc.contributor.author Palliyaguru, L.
dc.date.accessioned 2019-01-11T04:39:42Z
dc.date.available 2019-01-11T04:39:42Z
dc.date.issued 2018-11
dc.identifier.citation Wathsala, K.L., Kulathunga, M.U.S., Jayaweera, P.M., Palliyaguru, L. (2018). "Facile Synthesis of Fe3O4/TiO2 Composite with Enhanced Magnetic and Photocatalytic Properties for Water Purification", Proceedings of the 23rd International Forestry and Environment Symposium 2018 of the Department of Forestry and Environmental Science, University of Sri Jayewardenepura, Citrus Waskaduwa, Waskaduwa, Sri Lanka, 68 p. en_US
dc.identifier.issn 2235-9427
dc.identifier.uri http://dr.lib.sjp.ac.lk/handle/123456789/8171
dc.description.abstract The regeneration of TiO2 used in water purification via photocatalytic reactions is usually carried out using flocculation, and centrifugation. However, the major drawbacks in these methods are the needs of additional process controls, equipment, and energy. Use of magnetic separation in water treatment could be highly effective in both efficiency and operating cost over the other methods. In this study, ilmenite (Fe TiO3), a naturally available mineral widely used in TiO2 production, is modified into Fe3O4/TiO2 magnetic composite with enhanced magnetic and photo catalytic activity. The synthesized composite material was tested for photo degradation potential of a common herbicide1,2-dichlorophenoxyacetic acid. The synthesized Fe3O4/TiO2 was characterized using X-ray diffraction (XRD) patterns, X-ray fluorescence (XRF) spectroscopy, and FTIR spectroscopy. The mass susceptibility values of both ilmenite and the synthesized Fe3O4/TiO2 were also measured. The morphology of the composite particles was also analyzed by scanning electron microscopy (SEM).The identity of the synthesized Fe3O4/TiO2 was confirmed by the XRD pattern. FTIR peaks corresponding to Fe-O-O bending and Fe-O asymmetric stretching were observed at 533 cm-1 and 1,384 cm-1, respectively. The analysis of the synthesized Fe3O4/TiO2 with XRF data revealed the presence of both Fe (54%) and Ti (44%) and trace amounts of silicon, manganese, and aluminum. SEM data showed mostly spherical particles of sub-micron size. Magnetic susceptibility measurements indicate a strong diamagnetism in the composite material with a mass susceptibility of 8.05x10-3 m3kg which is much higher than the parent material, ilmenite (3.01x10-3 m3kg). According to the catalytic data the synthesised nanocomposite shows a strong propensity to remove a common herbicide, 1,2- dichlorophenoxyacetic acid, from an aqueous solution through photocatalytic degradation with approximately 65% removal efficiency. These results clearly confirms the synthesis of an environmentally significant photocatalyst with considerable magnetic properties. en_US
dc.language.iso en en_US
dc.publisher University of Sri Jayewardenepura 2018 en_US
dc.subject Fe3O4/TiO2, Ilmenite, Organic pollutants, 1, 2-dichlorophenoxyacetic acid, Photocatalysis en_US
dc.title Facile Synthesis of Fe3O4/TiO2 Composite with Enhanced Magnetic and Photocatalytic Properties for Water Purification en_US
dc.type Article en_US


Files in this item

This item appears in the following Collection(s)

Show simple item record

Search DSpace


Browse

My Account